Rastreadores GPS Veiculares

Fleet operators and logistics companies

Fleets need ignition status, not just dots on a map, because utilisation, idling and driver-hours reporting all key off ACC. Pick a hardwired model with an ACC input, a wide voltage range that survives 24V trucks, and an offline buffer so data is not lost in tunnels or rural dead zones.

The J03 and J11 both cache blind-spot data and resend it once the network returns, and the GT10 stores 2000 blind-spot points. If the fleet also wants video evidence, pair the tracker with a unit from the 4G dashcam and MDVR range rather than trying to make a tracker do camera work.

• Must-have: ACC detection, power-cut alarm, overspeed alarm, geofence, blind-spot data resend.
• Nice-to-have: driving behaviour scoring (J03), turn-point compensation for cleaner trajectories (GT10, J10, J11).
• Wiring: 9-90V or 9-95V input covers 12V light vehicles and 24V trucks on the same SKU, which keeps spares simple.
• See the deployment detail on the fleet management solution page.

Car rental and ride-hailing operators

Rental fleets care about recovery and mileage billing more than driver scoring. A relay output for remote fuel or power cut-off, plus a displacement alarm that fires when a vehicle moves while armed, covers most of the loss cases.

The J02 records mileage for rental billing and supports remote cut-off; the C03 car-charger tracker suits short-term or consumer-grade rental where no installer visit is possible. Both approaches are set out on the car rental page.

• Hidden install matters: the J10 and J11 are 83 x 23 x 13mm, small enough to conceal behind a dash panel.
• Tamper evidence: light-sensor and removal alarms flag a renter who opens the trim to pull the device.
• Multi-vehicle accounts: one login managing the whole fleet, with sub-accounts per branch.

Auto finance, leasing and buy-here-pay-here

Finance portfolios buy on two features: reliable remote immobilisation and a device that keeps reporting when someone cuts the harness. That means a relay output and a backup battery large enough to send the power-cut alarm before the unit dies.

The GX7 combines a 300mAh internal battery with tamper, fall-detection and low external battery alarms. The GT03 and GT06 both support remote cut-off with a 60mAh and 150mAh backup respectively. Portfolio-level workflow is covered on the auto finance and BHPH page.

• Immobilisation must be platform-triggered and SMS-triggered, so recovery teams are not blocked by a platform outage.
• Dual-server failover matters at portfolio scale: the J11 holds a primary and a backup server IP and switches automatically.
• Check local law on remote disable before quoting immobilisation as a feature in any market.

Motorcycle, three-wheeler and two-wheeler fleets

Two-wheelers are the hardest install: less space, more vibration, more water, and a 12V system that the tracker must not flatten overnight. Prioritise low sleep current, a compact housing and a sealed or potted build.

The J11 draws 25mA at 12V with a 10mA static current, and the J23 sleeps at 5mA with an IP65 housing. For bicycles and e-bikes, the SW16 is a self-powered 2400mAh tail-light form factor with IP67 sealing and WiFi-assisted positioning. Model notes are expanded on the motorcycle tracker page and in the guide to choosing a motorcycle GPS tracker.

Resellers and white-label brands

Resellers optimise for a narrow catalogue that covers most enquiries, consistent firmware behaviour across SKUs, and branding that does not raise the MOQ beyond what a first order can absorb. Two hardwired 4G models plus one OBD model usually covers 80 percent of inbound demand.

Because the range speaks a single tracker protocol, a reseller can put every SKU on one platform instance and avoid maintaining separate integrations. The commercial terms sit on the reseller programme page and in the white-label GPS tracker guide.

• Start with GT06 or GX3 as the volume hardwired unit, GX7 or J11 where alarms and failover matter, C30 for the plug-in tier.
• Ask for the APN and server IP to be pre-flashed so field installers never touch SMS configuration.
• Budget SIM data separately; see how much data a tracker consumes and the SIM card guide.

Wired vs OBD vs battery and magnetic: the install trade-off

Hardwired units are spliced into the ignition harness. They give ACC status and a relay output for engine cut-off, they never fall out, and they are the only sensible choice for finance, immobilisation and anything a driver might want to remove.

OBD units plug into the diagnostic port in under a minute and need no installer, which is why they dominate rental, insurance pilots and retail. The cost is visibility: anyone can unplug one, and the port is powered even with the ignition off, so sleep current management matters. The OBD tracker range covers the C28 and C30.

Battery and magnetic units carry their own power and attach with magnets, which suits trailers, containers and machinery with no supply to tap. They report on a schedule rather than continuously, so they are an asset tool rather than a fleet tool; see the asset tracker and portable tracker categories, and the comparison of wired versus wireless asset trackers.

• Wired: full feature set, ACC, relay cut-off, permanent power, needs a fitter and a workshop slot per vehicle.
• OBD: self-install, portable between vehicles, reads vehicle data, visible and removable.
• Battery or magnetic: no install at all, no ACC, no cut-off, reporting interval traded against battery life.
• Practical advice on placement is in where a GPS tracking device is installed on a car.

Why 4G now: the 2G and 3G sunset

Operators across Europe, Australia, India, Brazil and parts of Africa and the Gulf have either retired 2G and 3G or published a retirement date. A 2G tracker sold into one of those markets becomes scrap the day the carrier switches the band off, and the installed base has to be replaced at the reseller expense.

The practical rule: order 2G only for a market you have confirmed is still running GSM with no announced sunset, and only when the price gap genuinely decides the deal. Everything else should be 4G LTE with a band list checked against the destination operator.

In this range the J02, J03, J10, J23 and C28 are 2G-class radios, while the GT03, GT06, GT10, GX3, GX7, J11, C30 and SW16 are 4G LTE. The full band-by-band reasoning is in choosing between 4G, 3G and 2G and the 4G GPS tracker category.

Traqcare: the white-label platform

Traqcare is the in-house platform, available on web, iOS and Android, and it can be white-labelled with a reseller brand. It is the fastest route for a reseller who wants to sell a complete product rather than a box.

• Live tracking, history playback and trip reports.
• Alerts and geofences, including the power-cut, overspeed, vibration and displacement alarms the hardware raises.
• Fuel management and consumption reporting.
• Device management, user roles and sub-accounts for multi-branch operators.
• Integration and protocol references are on the developers page.
• Branding and pricing terms sit on the GPS tracking software page.

Third-party platforms and self-hosting

Buyers who already run a platform do not need to migrate. Because the devices speak a standard protocol, they are compatible with Traccar, Wialon, Navixy and GPS-Trace, and no port fees are charged for pointing a device at a third-party server.

The J11 goes one step further with dual server IPs, so a self-hosted operator can keep a failover endpoint configured on the device itself. Integration notes and protocol references are on the developers page and in the GT06 protocol explained.

• Compatible out of the box with Traccar, Wialon, Navixy and GPS-Trace.
• APN and server IP can be pre-configured at the factory so installers never send SMS commands.
• Platform selection for resellers is compared in the top white-label GPS tracking platforms for 2026 and build versus buy.

What "no monthly fee" actually means

Two SKUs in this range carry no-monthly-fee and no-subscription naming, and buyers reasonably ask what the catch is. SKYWONDER charges no recurring platform fee on those models; the device still needs a SIM with a data plan, which the buyer or the end user sources locally.

For a reseller this is a margin decision rather than a technical one. The background is set out in no monthly fee car GPS trackers.

When ODM is the right call

ODM is a different commitment: custom PCB layout, a unique enclosure, tailored firmware and an exclusive product for your brand. MOQ runs 1,000-5,000 units depending on complexity, and the timeline is 60-90 days for prototyping plus production.

It is worth it when you have a repeatable annual volume and a feature no stock model covers. It is not worth it to avoid a logo fee. Volume thresholds are discussed in the GPS tracker MOQ guide.

Commercial fleets and logistics

A logistics operator fits hardwired trackers across trucks and vans to measure utilisation, cut idling and evidence delivery times. ACC status gives engine-hours, the geofence gives arrival and departure timestamps, and the blind-spot buffer keeps the trip record intact through dead zones.

The GT10 suits 24V trucks and the J03 adds harsh-braking and acceleration scoring for driver programmes. Cold-chain and school-bus operators layer sensors and compliance reporting on top; see logistics and cold chain and school bus and AIS-140.

Car rental, leasing and ride-hailing

Rental operators use trackers for three jobs: finding an overdue vehicle, billing mileage accurately and proving where a vehicle was during a damage dispute. The J02 covers mileage statistics and remote cut-off; the C30 gives a branch the option of self-installing a unit in minutes.

Multi-vehicle account structures matter here because a rental group usually runs branch-level teams under one corporate login. The workflow is described on the car rental page.

Vehicle finance, leasing and BHPH

Finance portfolios protect collateral. The tracker needs a relay output for remote immobilisation, a backup battery that reports a cut harness, and a tamper alarm that fires when the device is pulled.

The GX7 covers tamper, fall detection and low external battery in one unit, and the J11 adds server failover so a platform outage does not blind a whole book. Legal constraints on remote disable vary by country, so confirm them per market before quoting; the commercial shape is on the auto finance and BHPH page.

Motorcycle, three-wheeler and last-mile delivery

Two-wheeler delivery fleets in India, Nigeria, Kenya and Mexico are the fastest-growing segment for this category, and the constraints are vibration, water and battery drain. A tracker that wakes the bike battery overnight will be blamed for every no-start.

The J11 at 25mA operating and 10mA static is the usual answer for petrol two-wheelers; the SW16 with its own 2400mAh cell and IP67 housing covers bicycles and e-bikes. Regional band and network notes are in the best 4G GPS tracker for Africa in 2026 and on the motorcycle tracker page.

In-house R&D

• Custom firmware development on existing hardware platforms.
• Protocol integration covering GT06, Teltonika and JT808.
• AI algorithm training for the ADAS and DMS camera range.
• Hardware modification and adaptation for specific markets.
• Support with the testing and certification process.

SMT production line

Boards are assembled on automated surface-mount lines with a 99.7 percent first-pass yield. Inspection is layered rather than end-of-line only, so a solder defect is caught before the unit is cased.

• High-speed SMT pick-and-place machines.
• Reflow ovens with a nitrogen atmosphere.
• AOI, automated optical inspection, on every board.
• X-ray inspection for BGA components.

Assembly and functional testing

• Housing assembly and cable routing.
• Firmware flashing and configuration, including your APN and server IP.
• GPS signal testing covering cold start and hot start.
• Cellular connectivity verification on the target bands.
• Waterproof testing on IP65 and IP67 models.
• Drop testing and vibration testing.
• Final QC inspection and packaging.

Pre-shipment and after-sales

Every batch passes in-line SMT testing, aging tests and a pre-shipment QC report before it leaves the building. Buyers are welcome to send their own inspector or a third-party agency.

All devices carry a 12-month manufacturer warranty against manufacturing defects, with firmware updates, integration support and spare parts available afterwards. Returns are accepted within 30 days on unopened goods; the buyer pays return shipping, a restocking fee may apply, and custom or white-label builds are non-returnable.

Partners are welcome to visit the Shenzhen facility with about a week of notice to see the SMT line, the assembly and testing workshops, the R&D lab and the sample room. Common sourcing questions are collected on the FAQ page and the wider range is indexed under solutions.